Toshiba Portege M100, Maintenance Manual

Page: 136 / 386

3 Tests and Diagnostics 3.12 Real Timer Test
3-28 PORTEGE M100 Maintenance Manual (960-452)
3
3.12 Real Timer Test
To execute the Real Timer Test, select 9 from the DIAGNOSTIC TEST MENU, press Enter and
follow the directions on the screen. Move the highlight bar to the subtest you want to execute and
press
Enter
.
Subtest 01 Real Time
A new date and time can be input during this subtest. To execute the real time subtest
follow these steps:
1. Select subtest 01 and the following message will appear:
Current date : XX-XX-XXXX
Current time : XX:XX:XX
Enter new date:
PRESS [ENTER] KEY TO EXIT TEST
2. If the current date is not correct, input the correct date at the “Enter new date”
prompt and press
Enter
. To enter " : ", press
Shift + ;.
The date is updated and
the following prompt will appear:
Enter new time :
3. If the current time is not correct, input the correct time in 24-hour format.
Pressing Enter toggles between the time and the date. To exit, press Ctrl + Fn +
Break .
Subtest 02 Backup Memory
This subtest checks the following backup memories:
Writes 1-bit of “on” data (01h through 80h) to address 0Eh through 7Fh
Writes 1-bit of “off” data (FEh through 7Fh) to address 0Eh through 7Fh
Writes the data pattern AAh and 55h to the address 0Eh to 7Fh
Then the subtest reads and compares this data with the original data.
To exit, press Ctrl + Fn + Break .