Toshiba PDR-M25 - 2MP Digital Camera Owner'S Manual Download

Page: 85 / 102

- 85 -

Basic

Photography

Playing Back/

Erasing Images

Other

Applications

Additional

Infor

mation

Getting Ready

Adjusting the LCD Monitor Brightness

This adjustment adjusts the brightness of the LCD monitor and not the brightness of the recorded image.

Set the mode dial to [

], [

] or [

Press the

(MENU) button.

The REC MENU or PLAY MENU is displayed.
You can set the LCD monitor brightness in either of these menus.

Use the

buttons to select [LCD] and press the

button.

The image and the LCD menu are displayed.

Use the

or buttons to adjust the brightness.

Press the

button to darken (–) the LCD monitor, or the

button to

lighten (+) the LCD monitor.
The LCD monitor can be adjusted within the range [–5] to [+5].
(Default is 0.)

Press the ENTER button.

This returns the camera to the previous mode.

LCD

Summary of Contents for PDR-M25 - 2MP Digital Camera







































































































Search results

Summary of Contents for PDR-M25 - 2MP Digital Camera

Reviews:

Related manuals for PDR-M25 - 2MP Digital Camera

Brands by name

Popular brands

Toshiba PDR-M25 - 2MP Digital Camera, Owner'S Manual

Search results

Summary of Contents for PDR-M25 - 2MP Digital Camera

Reviews:

Related manuals for PDR-M25 - 2MP Digital Camera

Brands by name

Popular brands