background image

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Important Information 

 

FCC compliance information in USA 

FCC Dec laration of Con fo rmity Co mpliance Statemen t (Part 15): 

The Toshiba LCD Color Monitor complies with Part 15 of the FCC rules. Operation is subject to the following 
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation. 
The party responsible for compliance to these rules is: 
TOSHIBA AMERICA INFORMATION SYSTEMS, INC. 
9740 IRVINE BLVD., IRVINE, CA92618-1697 
TEL: (949) 583-3000

 

NOTE:   

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to 
radio communications. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by 
one or more of the following measures: 
- Reorient or relocate the receiving antenna. 
- Increase the separation between the equipment and the receiver. 
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
- Consult the dealer or an experienced radio/TV technician for help. 

CAUTION:  Changes or modifications to this equipment not expressly approved by Toshiba could void the user

authority to operate this equipment. 

IMPORTANT SAFEGUARDS 

1. READ INSTRUCTIONS 

All the safety and operating instructions should be read before the unit is operated. 

2. RETAIN INSTRUCTIONS 

The safety and operating instructions should be retained for future reference. 

3. HEED WARNINGS 

All warnings on the unit and in the operating instructions should be adhered to. 

4. FOLLOW INSTRUCTIONS 

All operating and usage instructions should be followed. 

5. CLEANING 

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with a 
dry cloth. 

6. ATTACHMENTS 

The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards. 

7. WATER AND MOISTURE 

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet 
basement, or near a swimming pool. 

8. ACCESSORIES 

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, 
and serious damage to the unit. An appliance and cart combination should be moved with care. Quick stops, 
excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 

9. VENTILATION 

Slots and openings at the rear cabinet and bottom are provided for ventilation, these are to ensure reliable operation 
of the unit, and to protect it from overheating. These openings must not be blocked or covered. The openings should 
never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed 
near or over a radiator or heat source. This unit should not be placed in a built-in installation such as a bookcase or 
rack unless proper ventilation is provided or the manufacturer

s instructions have been adhered to. 

10. POWER SOURCE 

This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of 
the type of power supply to your home, consult your appliance dealer or local power company.

 

Use the supplied power supply cord at AC 120V or less. 

 

Summary of Contents for P1550LA



















Reviews: