60
Connections
Use a battery pack MEDB02SX (supplied) or MEDB02LX (not supplied). Charge it before using.
Attaching the battery pack
First disconnect the AC adapter and the power cord
from the player, then attach the battery pack.
1 Turn the player off.
2 Turn the player upside down.
3 Open the connector cover on the rear of the
player by pressing it.
4 Place the battery pack turned over by matching it
to line
1
1
1
1
1
, insert the hooks of the battery pack
into the corresponding holes on the rear of the
player.
Then, slide the battery pack in the direction of
the arrow
2
2
2
2
2
until a “click” is heard.
Note
Remove the battery pack from the player after being used.
Charging the battery pack
1 Attach the battery pack to the player.
2 Connect the supplied AC adapter and the power
cord to the player.
18
Charging starts, and the POWER/CHG indicator
illuminates in orange.
When the charging is completed, the POWER/CHG
indicator turns off.
Notes
• The attached battery pack may get warm when you are
charging it or operating the player. This is not a defect.
• The POWER/CHG indicator flashes in green when the
power in the battery pack is running out.
• Charge the battery with a surrounding temperature of +10
°
C
to +30
°
C.
Charging time of a battery pack
MEDB02SX (supplied)
approximately 4 hours
MEDB02LX (not supplied)
approximately 5.5 hours
The charging time of a battery pack may vary
depending on environment conditions and operational
status.
LCD brightness while using the battery pack
Since the player operates in a power saving mode when
the battery pack is attached, LCD brightness may be
reduced. It can be restored by pressing the DIMMER
button on the remote control. A brighter LCD display will
shorten battery pack life.
Time of continuing playback while using the
battery pack
MEDB02SX (supplied)
approximately 3 hours
MEDB02LX (not supplied)
approximately 5 hours
(Conditions: 25
°
C, earphone in use, LCD brightness
minimized, new battery pack in use.)
• The time of continuing playback may vary depending
on battery pack status, operational status and
environment conditions.
• Low temperature will shorten the time of continuing
playback.
Warning
• Do not use a battery pack other than one specified as it can result in a fire or damage to the unit.
• Do not heat, open, or short-circuit the battery pack. Do not throw the battery pack into a fire. Doing so may cause an
explosion or a fire.
• Attach the battery pack properly following the explanation below. Make sure that the battery pack is attached firmly to
the player when using it. Otherwise, the battery pack may be off its attachment and drop and cause personal injury.
1
2
1
2
1
2
Open the
connector cover
Battery pack
Match to line
1
Using the battery pack
Summary of Contents for P1500 - DVD Player - 8
