Toshiba P105-S6064, Quick Manual

Page: 8 / 12

Toshiba USB TV Tuner Quick Guide
8
3 Connect the IR receiver unit's USB cable to your MCE
notebook computer.
❖
Make sure the USB cable is plugged into the back of the
IR receiver unit (USB cable connector for IR receiver
unit side to the USB socket on the IR receiver unit).
❖
Turn on your MCE notebook computer.
❖
Insert the plug of the USB cable into an available USB
port on your notebook computer.
❖
Windows
®
will recognize and configure the device
automatically.
Configuring the MCE remote and receiver with a set-top box
This step is not required if you are not using a set-top box with your MCE
notebook computer.
If you are using your remote control with a set-top box, you need
to run the TV Setup Wizard in Windows
®
XP Media Center 2005.
To run the Wizard:
1 Select the Windows Start menu and launch the MCE
application.
2 If you do not go directly into the TV Setup Wizard, select
Settings from the MCE main menu.
3 Select
TV
, and then select
Setup TV Signal
.
Follow the directions on the Wizard screens. The Wizard will
guide you in configuring the MCE remote receiver and IR
transceiver for your set-top box.
Operating the MCE remote control
Make sure you are standing or sitting within 23 feet of the MCE
IR receiver unit and that an unobstructed line-of-sight with the
MCE IR receiver unit is maintained.
Point the remote unit at the IR receiver unit while pressing the
remote buttons.