Toshiba P105-S6064, Quick Manual

Page: 5 / 12

Toshiba USB TV Tuner Quick Guide
5
4 Start Microsoft
®
Windows
®
XP Media Center Edition 2005.
5 Go to Settings , select TV , and then select Setup TV Signal .
6 Follow the instructions on the Setup Wizard screens.
Cable TV or Satellite TV with set-top box
For this setup, you will need the following cables:
❖
One USB cable
❖
One coaxial adaptor cable
❖
Two RF coaxial cables (1 to 3 feet in length)(
not included
)
❖
One splitter ( not included )
Call your cable or satellite provider for the recommended splitter.
To add the Toshiba TV Tuner to an existing cable TV or satellite
TV connection:
1 Disconnect the RF coaxial cable from the set-top box OUT.
Replace it with one of the short-length RF coaxial cables and
connect the other end to the splitter IN.
2 Take the original RF coaxial cable removed in step one and
connect it to one of the OUT jacks on the splitter. This should
be connected to your TV.
3 Connect the other short-length RF coaxial cable into the other
splitter OUT jack. Then connect the other end of the
short-length coaxial cable into the SMB end (threaded) of the
coaxial adapter cable.
4 Connect the RF end (small end) of the coaxial adapter cable
into the left side of the TV Tuner.
5 Plug the small end of the USB cable into the right side of the
TV Tuner.
6 Plug the large end of the USB cable into a USB port on the
notebook computer.