24
TV operation
TV operation
Adjust the volume level by pressing VOL
+
or
–
.
The volume level will be indicated on the screen
by green bars. As the volume level increases, so
do the number of bars. If the volume decreases,
the number of green bars also decreases.
Set the TV/CABLE selection to the appropriate
position
&
.
1
2
3
Press CH
/
or Direct channel selection
buttons (0–9) and
button to select the
channel.
To change to a specific
channel (programmed
or unprogrammed):
Press Direct channel
selection buttons (0-9) on
the remote control.
For example, to select
channel 125, press 1, 2, 5.
To change to a specific digital channel:
Press the first 3 digits, then press
, followed
by the remaining 3 digits. For example, to select
channel 015-001, press 0, 1, 5,
, 0, 0, 1.
5
Notes:
• Digital cable channels may be represented by channel
numbers that include a “dash” (e.g., 85–002.) These digital
channel numbers may not match the numbers in the
channel line-up provided by your cable company. This is not
a malfunction.
• If a channel with no broadcast is selected, the sound will auto-
matically be muted.
• If a station being viewed stops broadcasting, the TV will auto-
matically shut itself off after 15 minutes.
To turn on the unit, press POWER.
The Power indicator will light.
• Every time you turn on the TV, the unit starts from
TV/VCR mode. When you use TV/VCR after DVD
operation, press
TV/VCR
.
TV
- VHF/UHF channels
CABLE - Cable TV channels
Cable TV
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
TV
VHF
2-13
UHF
14-69
+0 #
TV operation
POWER
Press INPUT. Then press
/
or Number
buttons (0 or 1) to select the desired mode
(0:ANALOG MODE, 1:DIGITAL MODE), then press
ENTER.
4
VOLUME
32
5V60101A [E]p23-29
2/22/06, 1:03 PM
24
