background image

26

TV operation

Then press ENTER.

The unit will begin memorizing all
the channels available in your
area.  Channel numbers will
remain red until auto memorizing
is complete.

Tuner setting

This unit is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they
must be programmed into the unit’s memory. In addition to normal
VHF and UHF channels, this unit can receive up to 113 Cable TV
channels. To use this unit with an antenna, set the TV/CATV menu
option to the TV mode. When shipped from the factory, this menu
option is in the CATV mode.

Press MENU. Press   or   to select “CH SETUP”,
then press ENTER.

Preparation:

 • Press 

TV/VCR

 to select the TV/VCR mode.

1

SETUP

MENU

Press   or   to select “TV/CATV”.

2

ENTER

ENTER

TV/CATV selection

Setting channels automatically

Notes:

• If a station being viewed stops broadcasting, the TV will

automatically shut itself off after 15 minutes.

• You can’t select “CH SETUP” if you set the channel to

“LINE1” or “LINE2”.

Press ENTER to select the “TV” or “CATV”.

The arrow indicates the selected mode.

3

Press MENU repeatedly until the menu screen
is cleared.

4

ENTER

SETUP

MENU

TV      - VHF/UHF channels
CATV - CABLE TV channels

M E N U
TIMER REC SET

TV SETUP

CH SETUP

AUTO REPEAT   ON   OFF

SYSTEM  SETUP

  /  /ENTER/MENU

CH  SETUP
  TV   CATV

AUTO  CH  MEMORY

ADD/DELETE

  /  /ENTER/MENU

CH  SETUP
  TV   CATV

AUTO  CH  MEMORY

ADD/DELETE

  /  /ENTER/MENU

1,3

1,4

Press 

 or 

 to select “AUTO CH MEMORY”.

2

3

ENTER

CH 002

AUTO

CH  SETUP
  TV   CATV

AUTO  CH  MEMORY

ADD/DELETE

á

  /  /ENTER/MENU

ñ

Press MENU repeatedly until the MENU screen
is cleared.

4

SETUP

MENU

ENTER

Press MENU. Press   or   to select “CH SETUP”,
then press ENTER.

1

SETUP

MENU

ENTER

1-2

M E N U
TIMER REC SET

TV SETUP

CH SETUP

AUTO REPEAT   ON   OFF

SYSTEM  SETUP

  /  /ENTER/MENU

 5F10101C (E)p23-30

7:5:03, 18:56

26

Summary of Contents for MW27FN1





































































Reviews: