Toshiba MW20FN3 Owner'S Manual Download Page 48

Page: 48 / 68

DVD

PLAY

REC

STOP

SP/SLP

RETURN

Duplicating a DVD or CD disc

Press SP/SLP to select the desired tape speed
SP or SLP.

Preparation:

• Press TV/VCR to select the TV/VCR mode.
• Load a cassette tape with the erase prevention tab intact.
• Load a DVD/CD disc.

Press DVD to select the DVD mode.

Press PLAY to start playback.

Press both REC to start recording.

The unit will change to the VCR mode

automatically and the playback picture
or sound will be duplicated on the
video cassette tape.

Press STOP if you finish recording.

If you wish to stop a DVD/CD disc,

press DVD to change the DVD mode,
then press STOP.

Notes:
• You may not record the beginning of the disc, so start to

playback the disc, then start to record.

• You cannot record the disc with copy guard function. The

following icon and text will show up on the TV screen for
about 4 seconds.

TV/VCR

DISC IS COPY PROTECTED

Recording a DVD/CD disc

You can record disc material in DVD, Audio CD, etc. onto a video
tape with this unit.

5F10201C (E)p48-53

5/6/03, 16:53

Summary of Contents for MW20FN3





































































Search results

Summary of Contents for MW20FN3

Reviews:

Related manuals for MW20FN3

Brands by name

Popular brands

Toshiba MW20FN3, Owner'S Manual

Search results

Summary of Contents for MW20FN3

Reviews:

Related manuals for MW20FN3

Brands by name

Popular brands