Toshiba MR-3018, Service Manual

Page: 31 / 122

© 2005 - 2011 TOSHIBA TEC CORPORATION All rights reserved MR-3018/3020/3021/3022
DESCRIPTION OF OPERATIONS
3 - 17
3
3.4.2 Drive Circuit for Read Motor
Fig. 3-7
This circuit controls the rotation/stoppage and the direction of rotation, excitation mode and motor cur-
rent of the read motor.
A drive clock signal (RMOT-CLK) and rotation direction signal (RMOT-CW/CCW) are input to control
the speed and direction of the motor rotation.
When the level of the enabling signal (RMOT-Enable) is set to "L", motor current is turned to OFF
regardless of the state of other signals.
For the excitation mode, either of 2 phase excitation, 1-2 phase excitation, W1-2 phase excitation,
2W1-2 phase excitation or the 4W1-2 phase excitation can be selected using the excitation switching
signal (RMOT-Mode1/RMOT-Mode2).
The edge switching signal (RMOT-Mode3) is used to specify the switching timing for excitation phase
either from when both the rise and decay edge of the CLK input are detected or when only the rising
edge is detected.
Motor current value can be set discretionary by changing the level of the reference setting signal
(RMOT-REF).