Toshiba MD911, Instruction Manual

Page: 52 / 94

Chapter 3 Setting
6F8C1399
40
No.2 coil writing area size:
Set the size of the coil write area.
No.3 Hold register reading area size:
Set the size of the retention register read area.
No.4 Hold register writing area size:
Set the size of the retention register write area.
No.5 input relay reading area size:
Set the size of the input relay read area.
No.6 input register reading area size:
Set the size of the input register read area.
Read coil status Reads the ON/OFF states of the coils.
Read input relay status Reads the ON/OFF states of the input relays.
Read retention register content Reads the current values of the retention registers.
Read input register content Reads the current values of the input registers.
Change single coil status Changes the state of a coil to ON or OFF.
Write single retention register Writes a value to a retention register.
Change multiple coil status Changes the state of the coils to ON or OFF.
Write multiple retention register Writes values to a series of retention registers.
Download the registered information to the MD911.
Download can be done as batch download to the controller.
Restart the system.
The downloaded information becomes effective from the next startup.
After the download is complete, turn ON the power of the MD911, which is
supplied to SA9**, from OFF.
Note
Be careful so that the address does not overlap with other station.