14
1) Perform Step 1) to 3) of 1 of 1.
2) Remove the cushioning without tearing it. ( Fig. 14-1 )
3) Use a flathead screwdriver or something to press on
the 3 clamp hooks on the handle. ( Fig. 14-2 )
1) Install it in the reverse of the procedure to remove it.
䊶
The cushioning for the handles acts as waterproofing, so
carefully stick it back on its original position so there are no gaps
caused by it ripping or lifting up.
䊶
Putting the vertical direction of the cushion is based on the clamp
hook, and bumps the left side to the cushion. ( Fig. 14-3 )
15
1) Perform Step 1) to 3) of 1 of 1.
2) Remove the cushioning without tearing it. ( Fig. 15-1 )
3) Use a flathead screwdriver or something to press on the 3 cla
mp hooks on the handle. ( Fig. 15-2 )
1) Install it in the reverse of the procedure to remove it.
䊶
The cushioning for the handles acts as waterproofing, so carefully
䊶
The cushion is put based on the dent of Side pan
e
l. ( Fig. 15-3 )
stick it back on its original position so there are no gaps
caused by it ripping or lifting up.
Clamp hook
(3 positions)
Flathead screwdriver
( Fig. 14-1 )
Cushioning
( Fig. 15-2 )
( Fig. 15-3 )
Clamp hook
(3 positions)
Flathead screwdriver
Cushioning
No. Component
1
.
Detachment
Handle
(Front
panel)
2
.
Attachment
Handle
(Side
panel)
1
.
Detachment
2
.
Attachment
Procedure
Remarks
( Fig. 14-2 )
( Fig. 14-3 )
( Fig. 15-1 )
Bump to cushion,
stick it.
Front panel
Reference position of
sticking the cushion
stick it.
Hook
Side panel
Reference
position of
sticking the
cushion
Reference position of
sticking the cushion
Reference
position of
sticking the
cushion
151