Toshiba MCU FLASH WRITER Instruction Manual Download Page 5

Page: 5 / 5

TOSHIBA MCU FLASH WRITER INSTRUCTION MANUAL

T.S ELECTRONICS

4-2. On-Board Connector (T2)

A On-Board Connector is provided to connections to the Target Board for On-Board Writing
See Table 2 for the On-Board Connector pin definitions.

Pin#

Signal

Description

VDD

TEST

Test pin for serial mode

TxD output

RxD input

RST

RESET signal input

GND

+5V

Table2. On-Board Connector Pin Descriptions

4-3. Actual Image

Summary of Contents for MCU FLASH WRITER

Page 1: ...TOSHIBA MCU FLASH WRITER INSTRUCTION MANUAL T S ELECTRONICS TOSHIBA MCU FLASH WRITER INSTRUCTION MANUAL Jan 2008 T S ELECTRONICS Copyright ⓒ 2006 TS ELECTONICS CO LTD All Right Reserved ...

Page 4: ...1 Universal Serial Bus USB Interface T1 A USB Connector is provided to facilitate connections to the USB interface on the FLASH WRITER See Table 1 for the USB pin definitions Pin Description 1 VBUS 2 D 3 D 4 GND Figure 3 TOSHIBA MCU FLASH WRITER Table1 USB Connector Pin Descriptions USB CONNECTOR RESET SWITCH POWER SWITCH YAMAICHI SOCKET On Board Connector ...

Page 5: ...d to connections to the Target Board for On Board Writing See Table 2 for the On Board Connector pin definitions Pin Signal Description 1 VDD 2 TEST Test pin for serial mode 3 TX TxD output 4 RX RxD input 5 RST RESET signal input 6 GND 0V 7 GND 0V 8 GND 0V 5V Table2 On Board Connector Pin Descriptions 4 3 Actual Image ...