Toshiba MCU FLASH WRITER Instruction Manual Download Page 4

Page: 4 / 5

TOSHIBA MCU FLASH WRITER INSTRUCTION MANUAL

T.S ELECTRONICS

4. Target Board

Refer to Figure 3 for the detail information about the TOSHIBA MCU FLASH WRITER

4-1. Universal Serial Bus (USB) Interface (T1)

A USB Connector is provided to facilitate connections to the USB interface on the FLASH WRITER
See Table 1 for the USB pin definitions.

Pin#

Description

VBUS

D-

D+

GND

Figure 3. TOSHIBA MCU FLASH WRITER

Table1. USB Connector Pin Descriptions

USB CONNECTOR

RESET SWITCH

POWER SWITCH

YAMAICHI SOCKET

On-Board
Connector

Summary of Contents for MCU FLASH WRITER

Page 1: ...TOSHIBA MCU FLASH WRITER INSTRUCTION MANUAL T S ELECTRONICS TOSHIBA MCU FLASH WRITER INSTRUCTION MANUAL Jan 2008 T S ELECTRONICS Copyright ⓒ 2006 TS ELECTONICS CO LTD All Right Reserved ...

Page 4: ...1 Universal Serial Bus USB Interface T1 A USB Connector is provided to facilitate connections to the USB interface on the FLASH WRITER See Table 1 for the USB pin definitions Pin Description 1 VBUS 2 D 3 D 4 GND Figure 3 TOSHIBA MCU FLASH WRITER Table1 USB Connector Pin Descriptions USB CONNECTOR RESET SWITCH POWER SWITCH YAMAICHI SOCKET On Board Connector ...

Page 5: ...d to connections to the Target Board for On Board Writing See Table 2 for the On Board Connector pin definitions Pin Signal Description 1 VDD 2 TEST Test pin for serial mode 3 TX TxD output 4 RX RxD input 5 RST RESET signal input 6 GND 0V 7 GND 0V 8 GND 0V 5V Table2 On Board Connector Pin Descriptions 4 3 Actual Image ...