Toshiba Lite-Vision plus RBC-AMS51E-EN, Owner'S Manual

Page: 28 / 42

– 27 –
Lite-Vision plus Remote Controller
Owner’s Manual
Energy saving ratio
Carry out the setting operation while the indoor unit is stopped. (Turn off the air conditioning unit before starting the
setting operation.)
NOTE
• Cooling / heating performance may be reduced a little because its power is saved during the Energy saving operation.
• “
” appears on the detailed display when the Energy saving operation is activated.
• The Energy saving operation cannot be set on the Follower remote controller when the dual remote controller system
is used.
• Adjust the clock before setting the Energy saving schedule operation. (page 31)
• The remote controller may not be used for setting the Energy saving operation depending on the settings of the
central control remote controller or the outdoor unit.
• The Energy saving schedule operation is not available when the clock display is blinking (the clock has not been
adjusted).
1
Push the [
∧
] / [
∨
] button to select
“2. Energy saving ratio” on the “Energy
saving” screen, then push the “
Set” [ F2] button.
2
Push the “ %+” [ F1] /
“ %-” [ F2] button to set the
value.
Æ The Energy saving ratio can be set within the
range from 50% to 100% by 1 %. The lower the
value is set, the higher the power saving effect
becomes.
3
Push the [ MENU] button.
Æ ” Setting” appears on the screen, then the
screen returns to the “Energy saving operation”
screen.
Energy saving operation
1.Energy saving operation
2.Energy saving ratio
3.Energy saving schedule
ON / OFF
Return Fix
Set
Set
Energy saving ratio
Energy saving ratio
75%
%
+
%
–
Return Fix
%
+
%
–
+00EH97062101_00EN.book Page 27 Saturday, March 12, 2011 8:24 AM