15
Operating procedures
WARNING
■
Before starting or stopping the escalator operation, make sure that
there are no passengers on the escalator, and that there are no
objects placed on the escalator.
Starting or stopping the escalator when there are passengers on the escalator could
cause the passengers tumble down the steps, which may lead to death or serious injury.
■
Operation of a key switch finishes, remove an operation key and
operator needs to keep it.
If an operation key is kept inserted on a switch, this may result in undesirable accident.
■
Do not operate keys and switches with wet hand.
There is possibility of electric shock if water reaches internal electrical components
from the operating keys, which may lead to death or serious injury. This could also
cause equipment failures or breakdown.
Start up
Make sure that there are no passengers on
the escalator, and that there are no objects
placed on the escalator.
• If anyone is on the escalator, wait for them to get off.
• If any objects are placed on the escalator, remove
them.
• If the escalator is interlocked to fi re-proof shutters,
make sure that the fi re-proof shutters are completely
open.
After checking!
Turn to the desired direction of operation
via the up/down key switch.
• After a buzzer sounding 3 seconds, escalator is
operated in the desired direction.
• If escalator starts operation, please remove a key
promptly (please do not hold 5 seconds or more).
• With lighting system, all of them will turn on at the
same time.
• With operating monitor, it displays on the getting on
port and on the getting off port.
Summary of Contents for Kindmover-II
Page 31: ...30 Memo ...