KD-1009
DISASSEMBLY
5 - 2
October 2000 © TOSHIBA TEC
[E] Side cover
(1) Open the side cover. Loosen the belt and re-
move it.
(2) Disconnect one connector.
(3) Remove the side cover.
Connector
Belt
5.2 PC Board
(1) Remove the rear cover.
(2) Disconnect 7 connectors and detach 4 lock sup-
ports to remove the PC board.
5.3 Upper and Lower Transport Rollers
(Plastic Rollers)
(1) Remove the side cover and the feeding-side front
cover.
(When the upper transport roller is also removed,
take off the feeding-side front cover of the
copier.)
(2) Detach the springs and bushings from the front
and rear sides and take off the rollers.
Lock supports
Springs
Plastic rollers
Springs
Summary of Contents for KD1009
