51
Installation
Appendix
Introduction
How to Use
Defi
nitions in
Confi
guration
Recording
The Network camera supports recording on network storage. Setting up editing
recording is the same as in application page. Recording name, status, weekly and
time schedule, stream source and destination of recording must be entered. There
can be at most two recording entries. To record on network storage, add the network
storage server in application page fi rst.
<url> http://<Network Camera>/setup/recording.htm
<Network Camera> is the domain name or original IP address of the Network
Camera.
Recording name
Unique name for recording entry.
Enable this recording
Check to enable this event.
Priority
The recording with higher priority will be executed fi rst.
Source
Select the source of the stream: stream 1 or stream 2.
Weekly and Time Schedule Settings.
Sun ˜ Sat
Select the days of the week.
Time
Select
Always
or input the time interval.
Destination
Select the network storage server.
Max. recording capacity
Total size for cycle recording in Kbytes.
File size for each recording
Single fi le size in Kbytes.
File Name Prefi x
The prefi x name will be added on the fi le name of the recording.
