31
Installation
Appendix
Introduction
How to Use
Defi
nitions in
Confi
guration
"Camera name"
The text displays the title at the top of the main page.
"Turn off the LED indicator"
Select this option to shut off the LED.
"Time zone"
Adjust the time with that of the time-servers for local settings.
"Keep current date and time"
Click on this to reserve the current date and time of
the Network Camera. An internal real-time clock maintains the date and time even
when the power of the system is turned off .
"Sync with computer time"
Synchronize the date and time of the Network Camera
with the local computer.
"Manual"
Adjust the date and time according to what is entered by the
Administrator. Notice the format in the related fi elds while doing the entry. Network
Camera starts up. It will fail if the assigned time-server cannot be reached.
"NTP server"
Assign the IP address or domain name of the time-server. Leaving the
text box blank connects the Network Camera to the default time-servers.
"Update interval"
Select hourly, daily, weekly, or monthly to update the time on the
NTP server.
"Digital input"
Select High or Low to defi ne normal status of the digital input. The
current status is shown, too.
"Digital output"
Select Grounded or Open to define normal status of the digital
output. The current status is shown, too.
Click on the
button to save all the changes. Otherwise, the correct time will not
be synchronized.
System parameters
