91
PTZ > PTZ settings
Advanced Mode
This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation.
Digital: Control the e-PTZ operation. It allows users to quickly move the focus to a pre-
configured target area for close-up viewing without physically zooming the camera.
Digital PTZ Operation (E-PTZ Operation)
Activated mode is “Digital“, the e-PTZ control settings section will be displayed as shown below:
Select stream: Select one of the stream 1 or 2 to set up the e-PTZ control. Please note that each stream
can be set up with its own preset and patrol settings. Refer to the following page for details about how to
set up
preset and patrol settings
.
Auto pan/patrol speed: Select the speed from 1~5 (slow/fast) to set up the Auto pan/patrol speed control.
When completed with the settings of e-PTZ, click
Save
to enable the settings on this page.
2011/10/15 17:08:56
