49
Introduction
Viewing
・
Listening
and Operation
Set up
Recording
Others
48
Introduction
Viewing
・
Listening
and Operation
Set up
Recording
Others
About Recording Images
A network camera can record images according to your needs. Recordable
media and its recordable contents are as follows.
NOTE
●
The SD memory card cannot perform Alarm recording, Continuous Recording,
External Control recording and playing simultaneously.The priority is given
in the order of external alarm recording - external control recording - recording
activated by motion detection - playing - Continuous Recording. Images are
not recorded during replay.
●
A picture displayed by the
button (one-shot button) should be saved
using "Save Picture As..." with a mouse right button. However, depending on
installation (Ceiling/Desktop) and its settings, the picture may be vertically
reversed.
Recordable Media
SD Memory Card
FTP Server
PC
Recordable Contents
・Alarm Recording images configured in "Alarm
Recording" settings (→page 51).
・Continuous Recording images configured in
"Continuous Recording" settings (→page 51).
･ Recorded images by schedule
･ Data of "When Alarm goes off"
･ Recorded images by external control
･ One image (JPEG) appeared by operating the
button. (See page 61)
･ Image (JPEG) recorded by operating the
button. (See page 61)
･
Voice (WAVE) recorded by operating the
button. (See page 62)
Recording Images in SD Memory Card
Images during "Alarm In", "Motion Detection", "Ext. Control In" and "Continuous
Recording" can be stored in an SD memory card inserted in the network camera.
When recording alarm images, perform "Alarm Settings" first as explained on
page 71 and set records in the following sequence.
Record setting
1
Insert SD memory card to the camera.
･ Insert an SD memory card as explained on page 16.
･ Click "SD In Out Wizard" and check "Insert SD memory card" in the
displayed SD Memory Card In and Out screen. Then click the
Execute button.
･ Clicking the Format button on the SD Memory Card In/Out screen
will format the SD memory card.
Important
●
Be certain to check "Remove SD memory card" in the SD Memory Card In and
Out screen when removing the SD card. Then click the Execute button.
Removing SD Card without executing "Remove SD memory card" may destroy
data.
2
Click "Camera Settings" on the Admin. Menu.
･ A sub menu for camera setup will appear.
･ Unless administrator log-in is made, the Administrator Setup Menu
will not be displayed. Perform administrator log-in.
3
Click "Recording" in the sub menu
･ The "Camera - Recording" screen will appear.
