Toshiba IK-WB15A - IP Network Camera, User Manual

Page: 10 / 64

19
Viewing
・
Listening
and Operation
Others
Set up
Introduction
Recording
18
Viewing
・ Listening
and Operation
Others
Set up
Introduction
Recording
2
Connect the AC adapter cable and the LAN cable to
the camera
･ For details, refer to "Connecting the Power Cord" (→ page 20) .
･ Verify that the type of LAN cable you plan to use is correct for the
connection type. See Connection Configuration on page 24.
3
Attach the camera to the rear cover
･ Reference the illustration in Step 4 on page 18.
･ Fix the camera to the rear cover from the sides using four M3
screws.
Important
●
Take care not to pinch the AC adapter cable and the LAN cable when
attaching the camera to the rear cover.
4
Set the Sun visor
･ Secure the sun visor to the rear of the camera using the four M4
screws.
5
Mount the camera directly to the wall using the wall
bracket (accessory)
Provided M4 Screws
②
①
NOTE
●
The screws which attach the wall bracket (
1
) and the wall are not
provided (
2
). Choose the best screws (
1
) for your wall when you buy
screws (
1
) at a store.
Installing the Camera (Cont.)
3
Connect the AC adapter cable and the LAN cable to
the camera
･ For details, refer to "Connecting the Power Cord" (→ page 20) .
･ Verify that the type of LAN cable you plan to use is correct for the
connection type. See Connection Configuration on page 24.
4
Install the camera to the rear cover
･ Fix the camera to the rear cover from the sides using four M3
screws.
Important
●
Take care not to pinch the AC adapter cable and LAN cable when
attaching the camera to the rear cover.
■ Outdoor Installation
1
Insert the AC adapter cable and the LAN cable
through the cable conduit
･ Reference the illustration in Step 2 on page 17.
･ Insert both cables from below.