Toshiba ID EDGE, Description

Page: 119 / 142

Appendix – Specifications
Capacities
IPedge General Description 01/12
105
Ring Tones (Internal Call Ring Tones for IP telephones) 10 10 10
Speed Dial - Station SD numbers per system
6
8,400 8,400 8,400
Speed Dial - System SD numbers per system 800 800 800
Tenants 8 8 8
Destination Restriction Level (DRL) Classes 16 16 16
Verified Account Codes 4,000 4,000 4,000
Voice Mail SMDI Interface
1
1 1 1
SIP URI per system 1,000 1,000 1,000
SIP Trunk service Index 128 128 128
LCR Exception Table Size 2,500 2,500 2,500
MAX digit number for LCR Route Plans 19 19 19
MAX Number of LCR Route Plans 128 128 128
CSTA Device Monitors 1,152 1,152 56
CSTA Call Monitors 560 560 56
1. SMDI and SMDR require a LAN interface.
2. Conference channels are used dynamically, so the maximum number of simultaneous conferences is
affected by the number of conference members in each conference. The total number of members in
simultaneous conferences cannot exceed the total number of conference channels. The total number of
conference channels available is configured through Enterprise Manager, and each conference channel
requires one Media Server Resource. Each conference can have up to eight members.
Third party SIP endpoints cannot be the originator of a conference call.
3. Each DNIS/DID Number uses up to three Routing Destination Numbers (Day1, Day2 and Night) in any
combination of (1~6) and (7~32) digit numbers.
4. This is not the number of simultaneous OCA but the terminal number of OCA available. (Simultaneous
number is limited by maximum capacity of line and call).
5. The maximum number of paged stations is limited to the lesser of the number of Media Server generic
channels available at the time of paging and to this maximum.
6. Up to 100 Station SD numbers, allocated in increments of 10, can be programmed per station.
Table 18 System Feature Capacities (continued)
Features EC Server EM Server EP Server