Toshiba HD-A1SN Service Manual Download Page 25

Page: 25 / 68

1-2. PC Board Replacement

1-2-1. Digital PC Board

Note:

• To replace the Digital PC board, enter an encryption key. Contact the service center for details.

1. Remove the top panel and top cover. (Refer to item 1-1-1.)

2. Remove the SO-DIMM (1). (Refer to item 1-2-2.)

3. Disconnect the connectors (2) to (5) and the flexible cables (6) to (9).

4. Disconnect the flexible cable (10) while raising the claws (11) in the arrow A direction.

5. Remove two connector screws (12).

6. Remove nine screws (13), then remove the Digital PC board (14).

The Digital PC board includes a lithium battery.

Cautions :

• Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Fig. 2-1-7

Connector (2)

Screws (13)

Gasket

SO-DIMM (1)

Digital PC board (14)

Connector (3)

Connector (5)

Flexible cable (10)

Flexible
cable (10)

Flexible cable (6)

Flexible cable (7)

Connector (4)

Flexible cable
(9)

Claws (11)

Connector screws (12)

Flexible cable (8)

Ferrite core

Summary of Contents for HD-A1SN





































































Search results

Summary of Contents for HD-A1SN

Reviews:

Related manuals for HD-A1SN

Brands by name

Popular brands

Toshiba HD-A1SN, Service Manual

Search results

Summary of Contents for HD-A1SN

Reviews:

Related manuals for HD-A1SN

Brands by name

Popular brands