Page 2
SAFETY
QUALIFIED OPERATORS ONLY
Only qualified persons are to install, operate, or service this equipment according to all
applicable codes and established safety practices.
A qualified person must:
1)
Carefully read the entire instruction manual.
2)
Be skilled in the installation, construction or operation of the equipment and
aware of the hazards involved.
3)
Be trained and authorized to safely energize, de-energize, clear, ground,
lockout and tag circuits in accordance with established safety practices.
4)
Be trained and authorized to perform the service, maintenance or repair of
this equipment.
5)
Be trained in the proper care and use of protective equipment such as rubber
gloves, hard hat, safety glasses, face shield, flash clothing, etc. in
accordance with established practices.
6)
Be trained in rendering first aid.
SAFETY CODES
Toshiba HCV-6KAU and HCV-6KALU vacuum contactors are designed and built in
accordance with NEMA ICS 3-2, UL 508, CSA 22.2-14 and IEC 60470. Installations
must comply with all applicable state and local codes, adhere to all applicable National
Electric Code (NFPA 70) standards and instructions provided in this manual.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
