Toshiba GR 200 Series, Instruction Manual

Page: 623 / 1563

6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)
- 602 -
 SBOw
 Oper
 Cancel

origin

stSeld

sboClass † (choice ”operate - once”)

ctlmodel (choice ”SBOes or SBOns” )
†
” sboClass ” can be found by scrolling down.
Figure 4.2-53 LN editing screen for SBO mode
Defining DIR mode
Figure 4.2-54 exemplifies the SPOS logic node saved as “CSWI1”. In the DIR mode, the
following three items should be selected using GR-TIEMS.

Oper

origin

ctlmodel (choice ” DOes or DOns ” )
Figure 4.2-54 LN editing screen for DIR mode
(ii)
Mapping output data
The user should group the DPSY01 signals with regard to GOOSE and REPORT; the user
should map them for IEC61850 communication using GR-TIEMS. Figure 4.2-55 illustrates
how to map a signal; it indicates that the signals for the DPSY01 function are required to be
mapped for IEC 61850 communications.