Toshiba GR 200 Series, Instruction Manual

Page: 1303 / 1563

6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)
- 1282 -
On any screen, press the screen-jump function key to display a screen, refer to the
following figure:
Figure 12.5-14 Operation of screen jump function
To cancel the screen-jump function, follow the procedure provided in Figure 12.5-15.
Note: 1) Once a screen is configured to a function key, it will not be deleted until a new
screen is configured for the same function key.
2) If a configured screen is disabled by “On/Off Function” setting (refer to section
12.5(iii)), the screen jump function is also disabled for the function key.
Figure 12.5-15 Cancelling screen jump function
OC
10:48 1/4
_OC1EN +>
On
OC2EN +>
On
OC3EN +
Off
[F1]
Main Menu
10:48 2/8
Record >
_Monitoring >
Setting >
IO setting >
Time >
Test >
[F1]
F1 Key Function
10:48 3/3
Screen Jump
Assign Signal
_No Assign
[►]
[ ENTER ]
Setting
Change Setting?
ENTER=Yes CANCEL=No
Function Key
10:48 1/7
F 1 Key >
F2 Key >
F3 Key >
F4 Key >
F5 Key >
F6 Key >
[
ENTER
]
[▲] x 2
F1 Key
10:48 1/3
* Function +
No Assign
Signal +
No Assign
Logic
Instant +
F1 Key Function
10:48 1/3
*Screen Jump
Assign Signal
No Assign
[◄]
[◄] x 2
F1 Key
10:48 1/3
Function +
Screen Jump
Signal +
No Assign
Logic
Instant +
[ ENTER ]
[
CANCEL
]
The “Screen Jump” function is
canceled on F1 key.
[▼] x 2