Chapter 10.
Plugins
161
Resistance to Colour
In Resistance to Colour mode, use the menus to select the unit that you would like to
use (choose from Ohms, Kiloohms, Megaohms), and use the on-screen keyboard to input
the value of the resistor that you would like to know the colour code of. The colour codes
are presented graphically and textually.
LED resistance
LED resistance calculator is used to determine the resistor necessary to light an LED
safely at a given voltage. First, select the voltage that the LED will use (the first option
is the most common and a safe bet), and the current that it will draw (likewise with
the first option). Then, use the onscreen keyboard to type in the supply voltage and,
if selected, the custom foreward current. This function produces safe estimates, but
use your own judgement when using these output values. Power rating and displayed
resistance are rounded up to the nearest common value.
10.4.15. Rockpaint
Figure 10.53.: Rockpaint
Rockpaint is a bitmap (
.bmp
) editor for Rockbox. It can open any
.bmp
file whose di-
mensions are the same size as your device’s screen or smaller; it can also create empty
bitmaps for you to work with.
The Rockbox manual
Toshiba Gigabeat F and X Series