manualshive.com logo in svg

Toshiba GD-1040, Service Manual, Page: 73 / 120

Share
Download
Toshiba GD-1040 Service Manual Download Page 73

May 2001 © TOSHIBA TEC

4-13

Internet FAX Kit - Mail Server Setup

STATIC_ROUTE_FILE=sendmail.route

# domain names to be deliverd directly (all/none/"domain names")

DIRECT_DELIVER_DOMAINS=all

# LOCAL_HOST_* does not check senders address

# '159.119' means '159.119.*.*'.

LOCAL_HOST_IPADDR=159.119

LOCAL_HOST_DOMAIN=tais.net

# ALLOW_RELAY_* does not check relay address

ALLOW_RELAY_TO=tais.net

#--- sendmail-ifax.def

sendmail.route is read from sendmail-ifax.def's configuration.  This file describe static routes of
mail transfer.  GW line is written the protocol using mail transfer and mail server name.  This
mail server name must be registered in /etc/hosts.  DOM line is written a domain name(right
side of @ mark) of the mail address.

#--- sendmail.route

GW

smtp:ifax.tais.net

DOM

tais.net

#--- sendmail.route

Case 2

The following figure shows another example of network environment.
tais.net has IP addresses which are 159.119.*.*.

sendmail-ifax.def and tais.net's zone file sets up like Case 1.
sendmail.route configuration is as follows.

#--- sendmail.route

GW

smtp:ifax.mail.tais.net

DOM

tais.net

#--- sendmail.route

2.2 Configuring Qpopper

2.2.1 Installing Qpopper

(1)

If you have not get Qpopper, please get the program.  You can download from the Internet.

The URL is "ftp://ftp.qualcomm.com/eudora/servers/unix/popper/".

(2)

You may have "qpopper4.x.x.tar.gz" file (latest version is "qpopper4.0.2.tar.gz").  Enter

the following command to extract the files:

$ tar zxvf qpopper4.0.2.tar.gz

$ cd qpopper4.0

Internet

sendmail

mail.tais.net

MX

iFax

([email protected])

Static

Summary of Contents for GD-1040

























































































































Reviews:

No comments