Toshiba GA-1191, Setup Manual

Page: 108 / 156

10 TopAccess ADMINISTRATION TAB PAGE - SETUP
MENU (Printing Function)
106 Setting up Printer Settings
5
Click [OK] to apply the changes.
When using the Internet Explorer, the settings that are displayed in each field may not be
changed even if you change the settings and click [Save]. However, the settings have
been changed in the equipment. In that case, click the Printer submenu then the page
displays the current settings in each field.
Setting up the general setting
In General Setting, you can specify the printer related options.
1) LT<-->A4/LD<-->A3
Select whether printing a document intended for that one paper size can be printed on paper
of a different size. For example, you can print a document set up for Letter size on A4 paper.
When disabled, this equipment will prompt users for the correct paper size.
2) Wide A4 Mode (for PCL)
Select whether the width of the printable area of copy paper is widened or not when you are
printing PCL print job on A4 paper.
Select [Enable] to widen it for approx. 3.5 mm / 0.14 inch (when in a portrait direction) and
approx. 1.5 mm / 0.06 inch (when in a landscape direction). Thus more data can be printed
for each line.
3) Print Startup Page
Select whether printing the startup page every time this equipment is powered on. The star-
tup page is the NIC Status page.
1
2
3