— 5 —
Base Unit
Transmitter Section
Connection
Preset
Place the Base Unit in VCO/TX FREQ ADJ mode in accordance with the procedure on page 3.
Alignment Procedure
Step
Adjustment
Remarks
1
VR202
(TX Power)
Connect the Power Meter to the RF test point on the Base RF PCB. Adjust
VR202 for a
−
4 dBm reading on the Power Meter.
2
CT201
(TX Frequency)
Connect the Frequency Counter to the RF test point on the Base RF PCB.
Adjust CT201 to make sure that the frequency is 926.900494 MHz.
3
RT2
(TX Modulation)
Press the “2” key to enter the TEST Mode 2. Connect the AF Generator to
the TEL Line Jack on the Base Main PCB. Make sure that the output is 1
kHz 61.0 mV from the AF Generator.
Connect the Deviation Meter to the RF test point on the Base RF PCB.
Adjust RT2 to indicate
±
8 kHz Dev.
Alignment Point Location on Base Main PCB and Base RF PCB
Power
Meter
Frequency
Counter
Deviation
Meter
RF
Test Point
RF
Test Point
BASE RF PCB
RF
Test Point
J5
TEL Line
1/2 Jack
1kHz 61.0mV
AC
Adapter
AC 120V
60Hz
J2
DC IN
9V Jack
BASE MAIN PCB
AF GEN.
J5
TEL LINE 1/2 Jack
J2
DC IN 9V Jack
Base Main PCB
RT2
VR202
RF TEST POINT
J201
Base RF PCB
CT201
Summary of Contents for FT-8258
