User’s Manual
EN-11
TOSHIBA FOLIO 100
1. Connect the power cord to the AC adaptor.
2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on the
right side of the device.
3. Plug the power cord into a live wall outlet - the
Power/Battery
indicator
on the display panel of the device should glow.
■
Always use the TOSHIBA AC adaptor that was included with your
device, or use AC adaptors specified by TOSHIBA to avoid any risk of
fire or other damage to the device. Use of an incompatible AC adaptor
could cause fire or damage to the device possibly resulting in serious
injury. TOSHIBA assumes no liability for any damage caused by use of
an incompatible adaptor.
■
Never plug the AC adaptor into a power source that does not
correspond to both the voltage and the frequency specified on the
regulatory label of the unit. Failure to do so could result in a fire or
electric shock, possibly resulting in serious injury.
■
Always use or purchase power cables that comply with the legal
voltage and frequency specifications and requirements in the country of
use. Failure to do so could result in a fire or electric shock, possibly
resulting in serious injury.
■
The supplied power cord conforms to safety rules and regulations in
the region the device is bought and should not be used outside this
region. For use in other regions, please buy power cords that conform
to safety rules and regulations in the particular region.
■
Do not use a 3-pin to 2-pin conversion plug.
■
When you connect the AC adaptor to the device, always follow the
steps in the exact order as described in the User’s Manual. Connecting
the power cable to a live electrical outlet should be the last step
otherwise the adaptor DC output plug could hold an electrical charge
and cause an electrical shock or minor bodily injury when touched. As
a general safety precaution, avoid touching any metal parts.
■
Never place your device or AC adaptor on a wooden surface, furniture,
or any other surface that could be marred by exposure to heat since
the device base and AC adaptor’s surface increase in temperature
during normal use.
■
Always place your device or AC adaptor on a flat and hard surface that
is resistant to heat damage.
