![background image](http://html.mh-extra.com/html/toshiba/es525p/es525p_quick-reference_429099013.webp)
4
Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges on a level
surface.
5
Load the paper stack with the printable side facedown.
Note:
Make sure the paper or envelope is loaded properly.
•
There are different ways of loading letterhead depending on
whether an optional staple finisher is installed or not.
Without an optional staple finisher
With an optional staple finisher
One
‑
sided printing
One
‑
sided printing
Two
‑
sided printing
Two
‑
sided printing
•
If you are loading prepunched paper for use with the staple
finisher, then make sure the holes on the long edge of the paper
are on the right side of the tray.
One
‑
sided printing
Two
‑
sided printing
Note:
If the holes on the long edge of the paper are on the
left side of the tray, then a jam may occur.
•
Do not slide the paper into the tray. Load paper as shown in the
illustration.
•
If you are loading envelopes, then make sure that the flap side
is facing up and the envelopes are on the left side of the tray.
13