Toshiba e-STUDIO557 Copying Manual Download Page 137

Page: 137 / 180

5 IMAGE ADJUSTMENT

Using Image Adjustment Functions 135

Using Image Adjustment Functions

Background adjustment

This function allows you to adjust the density of the original’s background. It avoids the back side of a 2-sided
original becoming visible on its front side.

This mode cannot be used with the automatic density adjustment function.

P.55 “Density Adjustment”

Press [BACKGROUND ADJUSTMENT] in the IMAGE menu.

Press [LIGHT] or [DARK] to adjust the density, and then press [OK].

Canceling background adjustment

Move the indicator to the middle, and then press [OK].

Press [RESET], and then [OK].

Front

Back

Not adjusted

Adjusted to have

a lightened

background

Summary of Contents for e-STUDIO557




















































































































































































Search results

Summary of Contents for e-STUDIO557

Reviews:

Related manuals for e-STUDIO557

Brands by name

Popular brands

Toshiba e-STUDIO557, Copying Manual

Search results

Summary of Contents for e-STUDIO557

Reviews:

Related manuals for e-STUDIO557

Brands by name

Popular brands