manualshive.com logo in svg

Toshiba e-STUDIO287CS, User Manual, Page: 238 / 368

Share
Download
Toshiba e-STUDIO287CS User Manual Download Page 238

USING TEMPLATES

- 238 -

2

1

3

4

5

6

7

14

If the screen below appears, place another 
original on the original glass and press 

[SCAN] or the [START] button to continue 
scanning. To finish the job, press [JOB 
FINISH], followed by the [FUNCTION 
CLEAR]button.

• The above screen is not displayed under the following 

conditions:
-

You scan the original from the Reversing Automatic 
Document Feeder without pressing [CONTINUE] to 
scan additional originals.

-

A scan preview is displayed.

• To cancel the operation, press [JOB CANCEL].
• To change the scan settings, press [SCAN SETTING].

P.191 "Changing Scan Settings"

Note

• When the equipment has scanned more than 1000 

pages in a job, the “The number of originals exceeds 
the limits. Will you save stored originals?” message 
appears. If you want to save the scans, press [YES].

• When the temporary workspace is full on the 

equipment’s hard disk, a message appears and the job 
is canceled. The available workspace can be viewed 
on the TopAccess [Device] tab.

• If the number of jobs waiting to store scans in the 

equipment’s hard disk exceeds 20, a message appears 
to indicate that the equipment’s memory is full. In this 
case, wait a while until memory becomes available 
again or delete unnecessary jobs from [JOB STATUS].

 

Basic Guide

Summary of Contents for e-STUDIO287CS

















































































































































































































































































































































































Reviews:

No comments