Toshiba e-Studio 332s User Manual Advanced Download Page 78

Page: 78 / 177

List of the Device Setting Menu Items

- 78 -

Profile

Item

Factory

Default

Description

Edit/
Register

Profile Name

(NULL)

Sets a profile name. Maximum 16 charac-
ters.

Protocol

CIFS

Selects a protocol to use for storing files.

Target URL

(NULL)

Sets a server address and a directory to
store the scanned data. Maximum

Port No.

445

Sets a port number.
Available range: 1 to 65535.

PASV Mode

OFF

Sets whether to use the FTP Passive
mode.
Display condition: FTP is set as a protocol.

User Name

(NULL)

Sets a user name to use for logging onto
the server. Maximum 32 characters.

Password

(NULL)

Sets a password to use when logging.
Maximum 32 characters.

Host Kanji-Code

EUC

Select Chinese character code at host
side. It is displayed only when FTP is
selected by protocol.

CIFS Character Set

UTF-16

Sets a character set to use in CIFS.
Display condition: CIFS is set as a proto-
col.

Encode Communication

None

Selects an encryption method for commu-
nication. Not available when using CIFS
protocol. Choices are different depending
on the protocol being selected.

Scan Size

A4 or Letter

Selects a scan size.

Image Settings Density

Sets the density of images.

Document Type

Text/Photo

Sets the image quality of documents.

Background Removal

Sets the default setup of the background
removal of documents.

Resolution

200 dpi

Selects a resolution for scanning.

Contrast

Sets the contrast of documents.

Hue

Sets the red-green color balance.

Saturation

Sets the color saturation of documents.

RGB

Sets the RGB contrast.

File name

(NULL)

Sets a file name. Maximum 64 characters.
The following options can be set as the
default file name:

#n: adding a serial number from 00000 to
99999
#d: adding the date of a file creation
(yymmddhhmmss)

Grayscale

OFF

Sets whether to scan a monochrome job
in grayscale (ON) or in black and white
(OFF).

Summary of Contents for e-Studio 332s

















































































































































































Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands

Toshiba e-Studio 332s, User Manual Advanced

Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands