Toshiba e-studio 180s User Manual Download

Page: 30 / 75

Copying

OTE

: If you press

Stop/Clear

or no buttons are pressed for

approximately 30 seconds, the machine cancels the copy job

and returns to Standby mode.

Press

Start

to begin copying.

2-UP copying

This feature prints 2 original images reduced to fit onto one

sheet of paper.

Place the document to be copied on the document glass

and close the cover.

Press

Menu

until

Special Copy

appears on the top line of

the display.

Press the scroll button ( or ) until

2-UP

appears and

press

Customize the copy settings including copy size, darkness,

and original type, by using the control panel buttons. See

page 4.1.

OTE

: You cannot adjust the copying size using the

Reduce/

Enlarge

menu while making a 2-UP copying.

Press

Start

to begin copying.

Your machine begins scanning the front side and will then

display

Set Next Page Press Start

Place the second document to be copied on the document

glass.

Press

Start

to begin copying.

OTE

: 2-UP copying reduces your original document by 50%.

Poster copying

This feature prints an image onto 9 sheets of paper (3x3). You

can paste the printed pages together to make one poster-sized

document.

Place the document to be copied on the document glass

and close the cover.

Press

Menu

until

Special Copy

appears on the top line of

the display.

Press the scroll button ( or ) until

Poster

appears and

press

Customize the copy settings including copy size, darkness,

and original type, by using the control panel buttons. See

page 4.1.

Press

Start

to begin copying.

OTE

: You cannot adjust the copy size using the

Reduce/

Enlarge

menu while making a poster.

Your original document is divided into 9

portions. Each portion is scanned and printed

one by one in the following order:

Setting the time out option

You can set the time the machine waits before it restores the

default copy settings, if you do not start copying after changing

them on the control panel.

Press

Menu

until

Copy Setup

appears on the top line of

the display.

Press the scroll button ( or ) until

Timeout

appears and

press

Press the scroll button ( or ) to select the time setting

you want.

Selecting

Off

means that the machine does not restore the

default settings until you press

Start

to begin copying, or

Stop/Clear

to cancel.

Press

to save your selection.

press

Stop/Clear

to return to Standby mode.

Summary of Contents for e-studio 180s












































































Search results

Summary of Contents for e-studio 180s

Reviews:

Related manuals for e-studio 180s

Brands by name

Popular brands

Toshiba e-studio 180s, User Manual

Search results

Summary of Contents for e-studio 180s

Reviews:

Related manuals for e-studio 180s

Brands by name

Popular brands