Toshiba DX1210-ST4N22 Page 63 User Manual Download

Page: 63 / 181

Getting Started

Turning off the computer

Click

Change plan settings

under the power plan to be

customized.

The Edit Plan Settings window appears.

(Sample Image) Edit Plan Settings screen

Click

Change advanced power

settings.

The Advanced settings tab of the Power Options window
appears.

Double-click

Sleep

to display the actions to be configured.

Double-click

Allow hybrid sleep

to show the

Setting

option.

Under

Setting

, change the option to OFF. This will make the

Hibernation option available in the Shut down button/menu.

To turn off the computer using the Hibernation command:

Click

Start

, and then click the arrow next to the

Shut down

button in the lower-right corner of the Start menu.

(Sample Image) Shut down menu

Arrow

Hibernate

Start button

Summary of Contents for DX1210-ST4N22






















































































































































































Search results

Summary of Contents for DX1210-ST4N22

Reviews:

Related manuals for DX1210-ST4N22

Brands by name

Popular brands

Toshiba DX1210-ST4N22, User Manual

Search results

Summary of Contents for DX1210-ST4N22

Reviews:

Related manuals for DX1210-ST4N22

Brands by name

Popular brands