manualshive.com logo in svg

Toshiba DX 730, User Manual

Share
Download
Toshiba DX 730 User Manual Download Page 84

HDMI Out

Some models are equipped with an HDMI out port.
An HDMI display device can be connected to the HDMI out port on the
computer. To connect the HDMI display device, follow the steps as detailed
below:

As the port operation of all HDMI (High-Definition Multimedia Interface)
display devices have not been confirmed, some HDMI display devices may
not function properly.

Connecting the HDMI out port

1.

Plug one end of the HDMI cable into the HDMI input port of the HDMI
display device.

2.

Plug the other end of the HDMI cable into the HDMI out port on your
computer.

Figure 3-14 Connecting the HDMI out port

1

2

1. HDMI out port

2. HDMI cable

Please do not plug/unplug an HDMI device under the following conditions:

The system is starting up.
The system is shutting down.

When you connect a television or external monitor to the HDMI port,
the display output device is set to HDMI.
When you unplug the HDMI cable and re-plug it, please wait at least 5
seconds before you re-plug the HDMI cable again.

User's Manual

3-39

Summary of Contents for DX 730















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands