38
EN
EN
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
7
Press [STOP
C
] to stop recording.
The recorded title will be included in the title list.
(Refer to “Guide to a Title List” on page 68.)
e.g.) DVD+R/DVD-RW/-R
Wait for a moment.
90%
This operation may take
awhile to be completed.
6
Press [REC
I
] to start recording.
“
I
” will be displayed for 5 seconds.
I
SP
1:53
Press
[PAUSE
F
]
to pause recording.
Press
[PAUSE
F
]
or
[REC
I
]
again to restart
recording.
To set one-touch timer recording (OTR)...
This is a simple way to set the recording time in blocks
of 30 minutes.
Press
[REC
I
]
repeatedly until the desired recording
time (30 minutes to 8 hours) appears on the TV screen.
One-touch timer recording will start.
0:30
(normal recording)
8:00
7:30
1:00
I
0:30
• To change the recording length during one-touch
timer recording, press
[REC
I
]
repeatedly until the
desired length appears.
• To cancel one-touch timer recording within the
specified time, press
[STOP
C
]
.
Note
• When you press
[REC
I
]
, recording starts immediately and continues until the disc is full or you stop recording.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• You cannot change the recording mode during the recording pause mode.
Note for one-touch timer recording
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY]
to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning the unit into the standby mode (One-touch timer recording will be canceled.).
- Using
[REC
I
]
or
[STOP
C
]
on the remote control.
• You cannot use the pause function during one-touch timer recording.
• If DVD one-touch timer recording is completed during VCR playback or recording, the DVD will be in stop mode
and the VCR keeps the current mode.
• When one-touch timer recording is finished and the power is turned into the standby mode, the unit will switch to
the timer-standby mode automatically if a timer recording has been programmed. Press
[TIMER SET]
to cancel
the timer-standby mode to use the unit continuously.
E9PKCCD̲DVR620KC̲EN̲book.indb 38
E9PKCCD̲DVR620KC̲EN̲book.indb 38
2011/09/01 9:29:07
2011/09/01 9:29:07
