background image

Value Propositions

Toshiba DP5000-Series Digital Telephones

4 of 20

Value Propositions

The DP5000 product family addresses the industry’s demand for an enhanced look with added 
functionality to the Toshiba brand of telephones. Toshiba listened to the voice of the customer (both 
dealers and end-users) to come up with the following enhancements:

Modern New Look 

Sleek low profile — less than 1-inch thick

Black body with dark gray keys

Metallic silver curved tilt stand with eight adjustable positions

Key pad retained the traditional Toshiba layout, maintaining continuity and operability in mixed handset 
deployments.

Large Display Area for Call Information 

All LCDs are 24 characters wide

Four lines of LCD to display call information (on the DP5022-SDM, DP5022-SD, DP5122-SD, 
DP5032-SD, and DP5132-SD telephones)

Nine lines of LCD on the DP5130-SDL telephone

LCD Key-Strip 

Integrated in the DP5130-SDL telephone

Integrated in the LM5110 add-on module, this module is supported on all of the DP5000 series 
telephones except the DP5008

Key labels are programmable via eManager 510A05, MyPhoneManager R510A02 (both local and 
remote), or user programming mode

User programmable line and trunk labels 

Feature labels – user selectable

Ease of deployment and dynamic changes

Backlight LCD

Available on: DP5122-SD, DP5132-SD, DP5130-SDL, and LM5110

Place the telephones anywhere: regular office, reception area, high-end home studio, hotel lounge, 
low-light environments, etc.

LCD backlight can be set to always on, always off or synchronized which turns backlight on anytime 
activity is sensed on the telephone and will automatically shut off after a period of time to conserve 
energy.

Handset/Mic Mute 

All models have microphone and speaker capability (Note: The DP5008 does not have a microphone.)

Enhanced Mute - now the handset and microphone are muted simultaneously

The MIC key on the telephones toggles between Mic and Mute. When the Mic key is lit, hands free 
communication is supported, when the Mic key is pressed and light is off, Mute is enabled.

Additional Characteristics

New LCD Technology — High Contrast Black-n-White LCD panel

Stylish Tilt Stand 

Built-In Headset Interface — eliminates the need for technician to install optional interface

Built-in Carbon Handset Interface controlled by software

Summary of Contents for DP5008





















Reviews: