Toshiba DMF102XKU - Wireless Digital Media Frame, Owner'S Manual

Page: 6 / 78

6
● Do not use volatile liquids, such as insect
spray, near the digital media frame. Do not
leave rubber or plastic products in contact
with the digital media frame for a long time.
They will leave marks on the finish.
● When the digital media frame is not in use,
be sure to turn off the power.
● If you do not use the digital media frame
for a long period, the unit may not function
properly in the future. Turn on and use the
digital media frame occasionally.
NOTES ON LOCATING
● When you place this digital media frame
near a TV, radio, or VCR, the playback picture
may become poor and the sound may be
distorted. In this case, move the digital media
frame away from the TV, radio, or VCR.
NOTES ON CLEANING
● Use a soft, dry cloth for cleaning. Do not
use any type of solvent, such as thinner and
benzine, as they may damage the surface of
the digital media frame.
● When cleaning the LCD screen, use a soft,
dry cloth.
NOTES ON MOISTURE CONDENSATION
Moisture condensation damages the
digital media frame. Please read the
following carefully.
Moisture condensation occurs, for example,
when you pour a cold drink into a glass on a
warm day. Drops of water form on the outside
of the glass. In the same way, moisture may
condense on the internal parts of the digital
media frame.
● Moisture condensation occurs during the
following cases.
- When you transport the digital media frame
directly from a cold place to a warm place.
- When you use the digital media frame in a
room where you just turned on the heater,
or a place where the cold air from the air
conditioner directly hits the unit.
- In summer, when you use the digital media
frame in a hot and humid place just after you
move the unit from an air conditioned room.
- When you use the digital media frame in a
humid place.
● Do not use the digital media frame when
moisture condensation may occur.
If you use the digital media frame in such
a situation, it may damage memory cards
and internal parts. Remove the memory
cards, connect the AC adaptor, turn on the
digital media frame, and leave it for two or
three hours. After two or three hours, the
digital media frame will have warmed up and
evaporated any moisture.
ABOUT DATA
● The contents in the memory storage
(internal memory, memory card, USB memory
device) cannot be guaranteed regardless of
the cause of damage or failure.
● Please note that data in the internal
memory may be deleted when repairing or
checking the Digital Media Frame.
WIRELESS LAN
INFORMATION
Wireless Interoperability
This product is designed to be interoperable
with any wireless LAN product that is based
on Direct Sequence Spread Spectrum
(DSSS)/Orthogonal Frequency Division
Multiplexing(OFDM) radio technology, and is
compliant to:
■ The IEEE 802.11 Standard on Wireless
LANs (Revision B/G), as defined and
approved by the Institute of Electrical and
Electronics Engineers.
■ The Wireless Fidelity (Wi-Fi) certification
as defined by the Wi-Fi Alliance. The “Wi-Fi
CERTIFIED” logo is a certification mark of the
Wi-Fi Alliance.
CAUTION
Bluetooth® and Wireless LAN devices oper-
ate within the same radio frequency range
and may interfere with one another. If you use
Bluetooth and Wireless LAN devices simul-
taneously, you may occasionally experience
a less than optimal network performance or
even lose your network connection.
If you should experience any such problem,
immediately turn off either one of your
Bluetooth or Wireless LAN.