49
Intr
oduction
Connections
Basic Setup
Setting up the remote control
5
While pressing SETUP, press 2.
The remote control mode is set to ‘“DR 2”.
Select the same mode that you have set to the recorder.
Notes
• If the recorder’s mode and the remote control’s mode are different, the recorder’s mode (DR 1, DR 2 or DR 3) appears in the
display of the front panel.
• When the batteries of the remote control are replaced or when the time indicator of the front panel flashes, check the remote
control modes of both the recorder and the remote control, and re-program if necessary.
Disabling the remote control for a temporary period
You can temporarily disable the reception of the remote control signals at the recorder, when the selection of DR 1,
DR 2 and DR 3 is not sufficient while you are using several Toshiba DVD video recorders.
Press the CHANNEL buttons on the recorder at the same time for three seconds or more.
The recorder display shows “DR - OFF”, indicating that the remote control is disabled.
To enable the remote control, perform the same step again. (The display shows “DR-1 , DR-2 or DR-3” depending
on your setting.)
Note
• This function is not available in Standby mode.
• You cannot use this feature when the power is turned off, if you have turned “On” the “Eco. mode” on the menu.
When using with DR 1
mode
When using with DR 2
mode
When using with DR 3
mode
SETUP
2
DR 1
DR 2
DR 3
DR 1
1
SETUP
+
2
SETUP
+
DR 2
DR 3
DR 1
3
SETUP
+
DR 2
DR 3
Remote control
Recorder
Mode setting
TIMESLIP
EASY
NAVI
INSTANT SKIP
INSTANT REPLAY
SETUP
ENTER
T.SEARCH
CLEAR
3
1
2
VCR Plus+
REC MODE
EXTEND
TV CODE
4
5
6
DELETE
+
10
7
8
9
0
PLAY
STOP
PAUSE
REC
LIBRARY
REC MENU EDIT MENU
CONTENT MENU
ANGLE
SUBTITLE
AUDIO
CHANNEL
REC
QUICK MENU
TOP MENU
MENU
RETURN
DVD
FR
AM
E/A
DJU
ST
PIC
TU
RE
SE
AR
C
H
SK
IP
S
LO
W
ENTER
Open the lid.
CHANNEL
