40
Programing a recording (REC MENU) (Continued)
Recording
Suggestions for the picture quality setting
• For normal recording or when you cannot decide which mode to choose.
Select “SP.”
• When you need a longer recording time and video quality is not important
Select “LP.” Inferior to “SP” in picture quality, but it can record longer.
• To record a high quality picture
Select “MN (Manual)” to set a desired bit rate. The higher the bit rate, better the picture quality is, but shorter the
recording length becomes. We recommend that you set about 6.0 Mbps to 6.8 Mbps.
• To fill the disc
Select “AT (Auto).” A bit rate is calculated automatically according to the remaining volume of the disc. Some
contents may not be recorded on the disc even if you select this function. This is not the function to make full use of
the remaining space capacity.
A timer program with this mark will be executed. To disengage, remove
this indicator.
Select a channel you want to record.
(While “L1” - “L3” is selected, the number buttons are not available to
select channels.)
Select a date of a TV program you want to record.
Enter a starting time of recording. (An initial setting is 10 minutes later than
current time.)
You can also use the number buttons under the lid of the remote.
Enter an end time. (Set the timer to begin recording no sooner than 2
minutes past the current time.)
You can also use the number buttons under the lid of the remote.
Fixed. (Not adjustable.)
Standard setting of recording time and picture quality. (Not applicable
when “L-PCM” is selected.)
For longer recording, but inferior to “SP” in picture quality. (Not
applicable when “L-PCM” is selected.)
Customized setting of rate (bit rate).
To set a rate automatically according to the remaining volume of the
disc. (If the disc does not have room for the TV program, the program
cannot be recorded to the end.)
Not applicable when “SP”, “LP” or “AT” is selected. You can set a rate at
intervals of 0.2Mbps from 2.0 to 9.2. (The upper limit of the value
depends on the “Audio” setting.)
Standard setting.
Superior to
D /M1. Recommended for recording music programs.
Uncompressed original digital audio. Equal quality to audio CD, but
recordable time will be shorter.
A programmed recording onto a Reservation Disc is marked with an
icon.
Setting items
*
If you set summer time on the clock of the recorder, see the notes on
page 32 in the “INSTALLATION GUIDE”.
** See
page 37 in the “INSTALLATION GUIDE”.
*** The digital recording technology for consumer products of Dolby Laboratories is used for
D /M1 and
D /M2.
Dolby Digital 192 kbps is set for
D /M1 and Dolby Digital 384 kbps for
D /M2.
Notes
• See
page 50 for details on “Video” and “Audio”.
• If you record with setting the bit rate to about 4.0 Mbps or below, the recorded pictures may not be played properly if change
the playback speed. There will be noise, and the picture quality is lower than other rate settings.
Exec
CH
Date
Start*
End*
Media
Video
(Bit Rate)
Audio
Disc
√
2-69 (TV), 1-125 (Cable),
0-999 (When “IR control”** is
“ON”), L1-L3
Specific date (from today to 2
month later)
Every Sunday to Saturday, Monday
to Thursday, Monday to Friday,
Monday to Saturday, everyday.
12:00 am – 11:59 pm
12:00 am – 11:59 pm
DVD
SP
LP
MN (Manual)
AT (Auto)
1.4, 2.0-9.2
D /M1***
D /M2***
L-PCM
Summary of Contents for D-KR2SU
