2
Troubleshooting
When using the camcorder:
Problem
Cause
Solution
The camcorder can not be
powered on normally.
The battery is out of power.
Replace the battery.
The battery is incorrectly
installed.
Re-install the battery.
The camcorder is still
powered on, but the LCD
screen does not display.
If the camcorder stays idle
over one minute, the LCD
screen will automatically
shut down to save power.
Press any button except
the power button to
reactivate the display.
Can not take pictures or
video clips when pressing the
Shutter or Record button.
Out of memory.
Free some space from
the SD/MMC card or the
internal memory.
The camcorder is recharging
the flash strobe.
Wait until the flash strobe
is fully charged.
Using a “protected” SD card.
Set the SD card to be
writable.
The LCD screen displays
“MEMORY ERROR” or
“CARD ERROR” message.
Or the camcorder cannot
read the memory card.
The format of the memory
card is not compatible with
the camcorder.
Use the camcorder
“Format” function to format
the card.
The memory card is
corrupted.
Replace the memory card
with a new one.
