49
Getting Started
Adding memory (optional)
15
Once the module’s connector is fully inserted into the socket,
press downward on the top edge of the module to seat the
module into the latches at the sides of the socket. These latches
should “snap” into place securely with the corresponding
cutouts in the side of the module. If the latches and cutouts do
not line up correctly, repeat steps
.
(Sample Illustration) Pressing down on the memory module
Do not force the memory module into position. The memory
module should be completely inserted into the socket and level
when secured in place.
(Sample Illustration) Inserting the memory module into the slot
For this model, Slot A is the bottom slot. Slot B is the top slot. If only
one memory module is to be installed, it must be installed in Slot A.
16
Replace the memory module slot cover and secure it using the
screw(s).
17
Re-insert the battery. For more information on inserting the
battery, see
“Inserting a charged battery” on page 95
.
latch
latch
Back of computer
Slot B
Slot A
NOTE
