manualshive.com logo in svg

Toshiba C50-B, User Manual

Share
Download
Toshiba C50-B User Manual Download Page 42

Figure 3-6 The front of the computer with the display panel open

5

1

9

8

10

13

11

7

6

7

2

3

4

14

12

1. Wireless communication antennas
(not shown)*

8. Battery pack

2. Microphone*

9. Stereo speakers

3. Web Camera LED*

10. Keyboard

4. Web Camera*

11. Touch Pad

5. Display screen

12. Touch Pad control buttons

6. Power button

13. AccuPoint *

7. Display hinges

14. AccuPoint control buttons*

* Provided with some models.
Product appearance depends on the model you purchased.

Wireless
communication
antennas

Depending on the configuration of your
computer, one or all of the following antennas are
built-in:

Wireless LAN
Wireless LAN/Bluetooth

Some models are equipped with Wireless
communication antennas.

Legal Footnote (Wireless LAN)
For more information regarding Wireless LAN, refer to the 

Legal Footnotes

section.

Microphone

The built-in microphone allows you to record
sounds for your application. Refer to the 

Sound

System and Video mode

 section for more

information.
Some models are equipped with the built-in
microphone.

User's Manual

3-7

Summary of Contents for C50-B






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands