background image

EN

3

-EN

Air Conditioning Control System (Touch Screen Controller)

Installation Manual

1

Precautions for safety

• Read these “Precautions for safety” carefully before installation.
• The precautions described below include important items regarding safety. Observe them without fail.

 

Understand the following details (indications and symbols) before reading the body text, and follow the instructions.

• After the installation work has been completed, perform a trial operation to check for any problems. Explain how to use and 

maintain the unit to the customer.

 

Ask customer to keep this Manual at accessible place for future reference.

Indication

Meaning of Indication

Text set off in this manner indicates that failure to adhere to the directions in the warning could result in serious bodily 

harm (*1) or loss of life if the product is handled improperly.

Text set off in this manner indicates that failure to adhere to the directions in the caution could result in serious bodily 

injury (*2) or damage (*3) to property if the product is handled improperly.

*1: Serious bodily harm indicates loss of eyesight, injury, burns, electric shock, bone fracture, poisoning, and other injuries which leave 

aftereffect and require hospitalization or long-term treatment as an outpatient.

*2: Bodily injury indicates injury, burns, electric shock, and other injuries which do not require hospitalization or long-term treatment as an 

outpatient.

*3: Damage to property indicates damage extending to buildings, household effects, domestic livestock, and pets.

Symbols

Meaning of Symbols

” Indicates prohibited items.

The actual contents of the prohibition are indicated by a picture or text placed inside or next to the 

graphic symbol.

” Indicates compulsory (mandatory) items.

The actual contents of the obligation indicated by a picture or text placed inside or next to the 

graphic symbol.

WARNING

Ask an authorized dealer or qualified installation professional to install or reinstall 
this unit.

 

Inappropriate installation may result in electric shock or fire.

Electrical work must be performed by a qualified electrician in accordance with 

this installation manual. 

 

The work must satisfy all local, national and international regulations.

 

Inappropriate work may result in electric shock or fire.

Be sure to turn off all main power supply switches before starting any electrical 

work.

 

Failure to do so may result in electric shock.

Do not modify the unit.

 

A fire or an electric shock may occur.

Always connect to ground

Improper grounding may result in an electric shock.

Before connecting the power, carry out Class D grounding according to the “Engineering Standard 

for Electric Work” and the “Internal Wiring Regulations”.

WARNING

CAUTION

Warning

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may 
be required to take adequate measures.

Summary of Contents for BMS-CT1280E

















Reviews: