32
Additional Setting Restored for Trend Interfaces (TT-64x):
Pin
Code
Disabled
Sensor Base Address
100
Switch Base Address
50
Knob Base Address
50
Object Enable Mask
All Objects Enabled
OutStation
Address
2
CNC IP Address
192.168.1.1
CNC
Address 1
CNC Port Number
10001
CNC
Usage
1
Additional Settings Restored for BACnet Interfaces (TB-64x):
Device
ID
200
UDP
Port
47808
New Setting Comparison
Disabled
Register as Foreign Device
Disabled
Foreign Device Reg TTL
1800 seconds
Preserve PVs & PAs
Disabled
Input PV -> Output PV
Disabled
Function 2 – Enable ‘Bootloader’ Mode
Bootloader mode allows the firmware to be updated from a PC.
Press and hold in the reset button while powering up the unit. Continue to hold in the reset
button for approx. 5 seconds. The unit is now in bootloader mode.
Note:
Enabling the bootloader in this way is only necessary if the firmware update software
fails to automatically put the unit into bootloader mode.
