28
9.4 Object Names
Object Object
Name
Notes
On/Off (Setup)
nnn (ON_w)
On/Off (State)
nnn (ON_r)
Error Code
nnn (ECode)
Operation Mode (Setup)
nnn (MD_w)
Operation Mode (State)
nnn (MD_r)
Fan Speed (Setup)
nnn (FS_w)
Fan Speed (State)
nnn (FS_r)
Room Temperature
nnn (RA)
Setpoint Temperature (Setup)
nnn (SP_w)
Setpoint Temperature (State)
nnn (SP_r)
Local Inhibit (Setup)
nnn (LI_w
Local Inhibit (State)
nnn (LI_r)
Air Direction (Setup)
nnn (AD_w)
Air Direction (State)
nnn (AD_r)
Ventilation (Setup)
nnn (VN_w)
Ventilation (State)
nnn (VN_r)
HVAC Network Status
Sys_HVAC_Network_Status
System Force Off
Sys_Force_Off
where ‘nnn’ is the unit name entered via the configuration program.
As of firmware v2.29, the room temperature object and the setpoint read and write objects
will contain temperatures valid to 1 dp. Setting the setpoint to 1 dp is reliant on the HVAC unit
accepting setpoint commands to this resolution.
Not currently supported
